background image

BM-2010  /  BM-2100  Bandwidth  Manager  User

s  Manual 

Copyright 

Copyright (C) 2003 PLANET Technology Corp. All rights reserved.   
The products and programs described in this User

s Manual are licensed products of PLANET Technology, This User

Manual contains proprietary information protected by copyright, and this User

s Manual and all accompanying hardware, 

software, and documentation are copyrighted.   
No part of this User

s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium 

or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, or information 
storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior express 
written permission of PLANET Technology. 
 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and 
makes no warranty and representation, either implied or expressed, with respect to the quality, performance, 
merchantability, or fitness for a particular purpose. 
PLANET has made every effort to ensure that this User

s Manual is accurate; PLANET disclaims liability for any 

inaccuracies or omissions that may have occurred. 
Information in this User

s Manual is subject to change without notice and does not represent a commitment on the part of 

PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User

s Manual. PLANET 

makes no commitment to update or keep current the information in this User

s Manual, and reserves the right to make 

improvements to this User

s Manual and/or to the products described in this User

s Manual, at any time without notice. 

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and 
suggestions. 

 
CE mark Warning 

This is a class A device, In a domestic environment, this product may cause radio interference, in which case the user may 
be required to take adequate measures. 

 
Trademarks 

The PLANET logo is a trademark of PLANET Technology. 
This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, 
these designations are claimed as trademarks or registered trademarks by their respective companies. 

 

Customer Service 

For information on customer service and support for the Bandwidth Manager, please refer to the following Website URL

 

 
http://www.planet.com.tw 
 
Before contacting customer service, please take a moment to gather the following information

 

¨ 

Bandwidth Manager serial number and MAC address 

¨ 

Any error messages that displayed when the problem occurred 

¨ 

Any software running when the problem occurred 

¨ 

Steps you took to resolve the problem on your own 

 

Revision 

User

s Manual for PLANET BM-2010 / BM-2100 

Model: BM-2010 / BM-2100 

Rev: 1.0 (May, 2003) 

Part No. EM-BM2010 

 

 

Summary of Contents for BM-2010













































Reviews: