BM-2002 Bandwidth Manager User
’
s Manual
- 27 -
4.2.7 Access Control Setting
Access Control function allows you to control the access right of packets based on their IP address and
TCP/UDP port. In Access Control setting, you can enable or disable the access control function and choose
its access control mode.
¨
Access Control Function:
Enable or disable access control function. If it is enabled, the access
control checking will be processed first before bandwidth policy checking.
¨
Access Control Mode:
There are two options on access control mode
–
Allow the traffic when deny rules aren
’
t defined in the Access List.
You can choose allow
or deny on the policy field on the Access List. Select this option if you only want to block the
Internet access of defined IP addresses and TCP/UDP port with deny policy.
Deny the traffic when allow rule aren
’
t defined in the Access List.
Select this option if you
only want to allow the Internet access of defined IP addresses and TCP/UDP port with allow
policy.
4.2.8 Access List
Access List allow you to define the access right based on traffic
’
s source and destination IP address, and
TCP/UDP port (service). The following functions and information are provided on this page:
¨
New -
Create new service.
¨
Prev -
Go to previous page.
¨
1, 2,
…
-
First, second,
…
page.
¨
Next -
Next page.
¨
Action -
On the Action field of each service name, the following two buttons are provided:
- Modify the Access list
- Delete the Access list
