Setup
11
Configuration Program
The ADE-4300/ADW-4300 contains an HTTP server. This enables you to connect to it,
and configure it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
·
Netscape V4.08 or later
·
Netscape 7
·
Internet Explorer V5.01 or later
Preparation
Before attempting to configure the ADE-4300/ADW-4300, please ensure that:
·
Your PC can establish a physical connection to the ADE-4300/ADW-4300. The PC
and the ADE-4300/ADW-4300 must be directly connected (using the Hub ports on
the ADE-4300/ADW-4300) or on the same LAN segment.
·
The ADE-4300/ADW-4300 must be installed and powered ON.
·
If the ADE-4300/ADW-4300's default IP Address (192.168.0.1) is already used by
another device, the other device must be turned OFF until the ADE-4300/ADW-
4300 is allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the ADE-4300/ADW-4300:
1. After installing the ADE-4300/ADW-4300 in your LAN, start your PC. If your PC is
already running, restart it.
2. Start your WEB browser.
3. In the
Address
box, enter "HTTP://" and the IP Address of the ADE-4300/ADW-
4300, as in this example, which uses the ADE-4300/ADW-4300's default IP Ad-
dress:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter default user name admin
and leave the password field blank (no password).
