Planet ADP-8301, User Manual

Page: 2 / 27

Copyright
Copyright (C) 2002 PLANET Technology Corp. All rights reserved.
The products and programs described in this User
’
s Manual are licensed products of
PLANET Technology, This User
’
s Manual contains proprietary information protected by
copyright, and this User
’
s Manual and all accompanying hardware, software, and documen-
tation are copyrighted.
No part of this User
’
s Manual may be copied, photocopied, reproduced, translated, or re-
duced to any electronic medium or machine-readable form by any means by electronic or
mechanical. Including photocopying, recording, or information storage and retrieval systems,
for any purpose other than the purchaser's personal use, and without the prior express writ-
ten permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environ-
ments and applications, and makes no warranty and representation, either implied or ex-
pressed, with respect to the quality, performance, merchantability, or fitness for a particular
purpose.
PLANET has made every effort to ensure that this User
’
s Manual is accurate; PLANET dis-
claims liability for any inaccuracies or omissions that may have occurred.
Information in this User
’
s Manual is subject to change without notice and does not represent
a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccura-
cies that may be contained in this User
’
s Manual. PLANET makes no commitment to update
or keep current the information in this User
’
s Manual, and reserves the right to make im-
provements to this User
’
s Manual and/or to the products described in this User
’
s Manual, at
any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would
appreciate your comments and suggestions.
FCC Compliance Statement
This equipment generates and uses radio frequency energy and if not installed and used
properly, that is, in strict accordance with the instructions provided with the equipment, may
cause interference to radio and TV communication. The equipment has been tested and
found to comply with the limits for a Class A computing device in accordance with the speci-
fications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference in a residential installation. However, there is no guar-
antee that interference will not occur in a particular installation. If you suspect this equipment
is causing interference, turn your Ethernet Switch on and off while your radio or TV is show-
ing interference, if the interference disappears when you turn your Ethernet Switch off and
reappears when you turn it back on, there is interference being caused by the Ethernet
Switch.
You can try to correct the interference by one or more of the following measures:
w
Reorient the receiving radio or TV antenna where this may be done safely.
w
To the extent possible, relocate the radio, TV or other receiver away from the Switch.
w
Plug the Ethernet Switch into a different power outlet so that the Switch and the receiver
are on different branch circuits.
If necessary, you should consult the place of purchase or an experienced radio/television
technician for additional suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interfer-
ence, in which case the user may be required to take adequate measures.