22
Save Configuration:
Clicking this will link you to the
Save Settings / Reboot
page.
5.3.2 Ethernet Mode Setting
The Ethernet Mode configuration page allows you to set the LAN port into the following
modes:
l
AutoSense (default):
The Router will automatically sense which mode to use, se-
lecting between 100 Mbps Full Duplex, 100 Mbps Half Duplex, 10 Mbps Full Duplex,
and 10 Mbps Half Duplex.
l
100 Mbps Full Duplex:
Data can be transferred and received simultaneously at the
transfer rate of 100 Mega-bits per second.
l
100 Mbps Half Duplex:
Data cannot be transferred and received at the same time.
For example, data can be sent, and once the transmission is complete, data can be
received. This is done at a transfer rate of 100 Mega-bits per second.
l
10 Mbps Full Duplex:
Data can be transferred and received simultaneously at the
transfer rate of 10 Mega-bits per second.
l
10 Mbps Half Duplex:
Data cannot be transferred and received at the same time.
For example, data can be sent, and once the transmission is complete, data can be
received. This is done at a transfer rate of 10 Mega-bits per second.
Summary of Contents for ADE-4110
