10
4.4 Setting 40GBASE-X for 100G SFP+ Port
The Managed Switch supports both
40GBASE-X
and
100GBASE-X
SFP
transceivers by manual setting and the default SFP+ port speed is set to 100Gbps.
For example, to establish the fiber connection with 40GBASE-X SFP transceiver in
the
cgigaethernet 0/1
, the following command configuration is required:
Switch#
config
Switch_config#
interface cgigaethernet 0/1
Switch_config_cg0/1#
speed 40000
Switch_config_cg0/1#
exit
Switch_config#
interface range cgigaethernet 0/2-4
Switch_config_if_range#
speed 40000
Switch_config_if_range#
Figure 4-7
Setting 40GBASE-FX Screen
4.5 Changing Password
The default password of the switch is “admin”. For security reason, it is
recommended to change password and the following command configuration is
required:
Switch#
config
Switch_config#
username admin password planet2018
Switch_config#
Figure 4-8
Changing Password Interface Screen