5. Sometime WPS may fail, and you can click ‘PBC’ button few more times to try again. When
an access point is connected, you can click ‘Disconnect’ to disconnect your wireless
network card from a connected access point, or select another WPS-enabled wireless
access point, then click ‘Connect’ to establish connection to selected access point, if there
are more than one WPS-enabled access point found. You can also click ‘Rotate’ button, and
next access point on the list will be selected to establish connection.
If you want to delete a found access point from the list, select it and click ‘Delete’ button.
3-6-2 WPS Setup - PIN
1. The PIN number of your WNL-U554 is an eight-digit number located at the upper-right
position of configuration utility. Remember it, and input the number to your wireless access
point as the WPS PIN code (Please refer to the user manual of your wireless access point