Planet Networking & Communication WGSW-50040, Configuration Manual, Page: 102 / 267

11-6
11.5.1.2 MAC Address Binding Configuration Task List
1. Enable MAC address binding function for the ports
2. Lock the MAC addresses for a port
3. MAC address binding property configuration
1. Enable MAC address binding function for the ports
Command Explanation
Port Mode
switchport port-security
no switchport port-security
Enable MAC address binding function for
the port and lock the port. When a port is
locked, the MAC address learning function
for the port will be disabled: the “ no
switchport port-security ” command
disables the MAC address binding function
for the port , and restores the MAC address
learning function for the port.
2. Lock the MAC addresses for a port
Command Explanation
Port Mode
switchport port-security lock
no switchport port-security lock
Lock the port, then MAC addresses
learned will be disabled. The “ no
switchport port-security lock ” command
restores the function.
switchport port-security convert
Convert dynamic secure MAC addresses
learned by the port to static secure MAC
addresses.
switchport port-security timeout <value>
no switchport port-security timeout
Enable port locking timer function; the “ no
switchport port-security timeout ”
restores the default setting.
switchport port-security mac-address
<mac-address>
no switchport port-security
mac-address <mac-address>
Add static secure MAC address; the “ no
switchport port-security mac-address ”
command deletes static secure MAC
address.
Admin Mode
clear port-security dynamic [address
<mac-addr> | interface <interface-id>]
Clear dynamic MAC addresses learned by
the specified port.