User’s Manual of WGSW-48000
91
•
MASK
Defines the source IP address
mask
.
•
DIP
(Destination IP Address)
Matches the destination port IP address to which packets are addressed to the ACE. And
it's format is w.x.y.z .
•
MASK
Defines the destination IP address mask
•
SRC Port
Defines the
TCP/UDP source port
to which the ACE is matched. This field is active only if
800/6-TCP or 800/17-UDP is selected in the Select from List drop-down menu.
The possible field range is
0 - 65535
•
DST Port
Defines the
TCP/UDP destination port
. This field is active only if 800/6-TCP or
800/17-UDP is selected in the Select from List drop-down menu.
The possible field range is
0 - 65535
•
Packet Type
Where selects from a protocols list on which ACE can be based. The possible field values
are:
•
ICMP
, which indicates that the Internet Control Message Protocol (ICMP) is used to
classify network flows.
•
IGMP
, which indicates that the Internet Group Management Protocol (IGMP) is used
to classify network flows.
•
TCP
, which indicates that the Transmission Control Protocol is used to classify
network flows.
•
UDP
, which indicates that the User Datagram Protocol is used to classify network
flows.
•
IP
, which indicates that all IPv4 frames are used to classify network flows.
•
GRE
, which indicates that the Generic Routing Encapsulation (GRE) protocol is used
to classify network flows.
MAC ACL
•
MAC SA
Matches the
source MAC address
to which packets are addressed to the ACE. And it's
format is XX-XX-XX-XX-XX-XX.
•
MASK
Defines the source MAC address mask.
•
MAC DA
Where matches the destination MAC address to which packets are addressed to the ACE.
And it's format is XX-XX-XX-XX-XX-XX.
•
Ether Type
Means destination TCP/UDP port number.
The range is from 1 to 65535.
•
802.1Q VLAN ID
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID
number. The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN ID
value.
•
Add Entry
Inserts this ACL entry.
