manualshive.com logo in svg

Planet Networking & Communication WAP-4036, User Manual, Page: 12 / 36

Share
Download
Planet Networking & Communication WAP-4036 User Manual Download Page 12

3.1 Status 

This page will show most of the basic configuration parameters of the WAP-4036. It is the first page 

shown after login as below. You can usually get context sensitive help by clicking on the Help link at 

the top right of the page. 

 

 

 

Parameter Descriptions 

LAN Status 

This section shows the LAN interface parameters of the wireless AP. This 

includes information such as: The MAC address of LAN interface, IP/Subnet 

Mask, DHCP Server (whether the DHCP Server is Enables or disables, and 

display address pool). 

Wireless Status 

This section shows the WLAN interface parameters of the wireless AP. This 

includes information such as: Wireless (whether Wireless interface status is 

active), Connection (whether have active wireless stations that are connecting 

to the AP and display number of them), The MAC address of WAN interface, 

Radio Band (The type of transmission protocol your wireless network uses), 

SSID, channel number, security. 

System Information

This section shows the installed version of the firmware of the WAP-4036. 

And company information. 

 

 

 

To apply any settings you’ve altered on any page, click the Save button. Otherwise the 

modified settings would be lost after the AP reboot.   

 

 

12

Summary of Contents for WAP-4036





































Reviews:

No comments