7-inch SIP Indoor Touch Screen PoE Video Intercom
VTS-700P
12
Chapter 4. Configuration
4.1 How to use the VTS-700P
When the PoE Ethernet cable is connected, you will see a penguin in the upper left corner of the
VTS-700P screen, and you also can see the MAC address, default IP location (192.168.0.20), and the
version number. On the left side of the VTS-700P home page, the temperature, weather, date and time
are displayed. On the right side of the VTS-700P home page, four types of anti-theft monitoring screen
are shown. At the bottom of the screen there are scene control, and intercom function (We will
introduce each function later.). There are five function buttons on the right hand side of the screen.
Scene control
(
Z-Wave Gateway
is required
)
Dial button
Weather and
time information
Four types of anti-theft monitoring screen
(
Yellow:
Check the DI status
)
(
Black:
Do not check the DI state
)
Security system start / release
Camera monitor
Answer / hang up
Call guard room
Open door lock