Security Configuration
63
Dest IP
These settings determine which traffic, based on their destination
IP address, is covered by this rule.
Select the desired option:
•
Any - All traffic from the source port is covered by this rule.
•
Single address - Enter the required IP address in the "Start IP
address" field". You can ignore the "Subnet Mask" field.
•
Range address - If this option is selected, you must complete
both the "Start IP address" and "Finish IP address" fields.
You can ignore the "Subnet Mask" field.
•
Subnet address - If this option is selected, enter the required
mask in the "Subnet Mask" field.
Services
Select the desired Service or Services. This determines which
packets are covered by this rule, based on the protocol (TPC or
UDP) and port number. If necessary, you can define a new Ser-
vice on the "Services" screen, by defining the protocols and port
numbers used by the Service.
Action
Select the desired action for packets covered by this rule:
Log
This determines whether packets covered by this rule are logged.
Select the desired option.
