PLANET VIP-152T User’s Manual
35
2.
-idtime:
set the duration(in second) of two pressed digits in dial mode as timed out. If after the
duration user hasn’t pressed next number, VIP-152T will dial out all number pressed.
3.
-keypad:
set DTMF type .User can select DTMF type VIP-152T receive and
transmit.(
sysconf –keypad 0/1 ,
0 for in band ,1 for RFC2833.)
4.
-2833type:
change RFC2833 Payload type.
5.
-eod
: select end of dialing key, e.g. set end of dial key as “
＊
” button , after finished pressing dialing
number then press “
＊
” will dial out. (
sysconf –eod 0/1/2
, 0 for no end of dial key , 1 for “
＊
” button,
2 for “
#
” button )
usr/config$ sysconf
System information and configuration
Usage:
sysconf [-idtime digit] [-keypad dtmf]
[-2833type type] [-eod digit]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-service Specify lanphone service type. (0: Normal service,
1: HotLine service.)
-keypad Select DTMF type: 0=In-band,
1=RFC2833.
-2833type RFC2833 Payload Type (range:96~128 inter-used:100,102~105)
-eod End of Dial Digit setting(0: NONE, 1: *, 2: #)
-privacy Privacy Number Type(0: NONE, 1: Japan)
Example:
sysconf -keypad 0 -eod 2
usr/config$
4.13. [sip] command
1. –print:
display all current configurations.
2. –mode
: enable VIP-152T in SIP Proxy or Peer-to-Peer Mode.
Usage:
sip –mode 0/1
(1 for Proxy mode, 0 for Peer-to-Peer mode)
3. –px
: set proxy server IP address or URL address (
sip –px “IP address or URL of Proxy server”
).
4. –pxport:
set listening port of Proxy server.
5. –outpx:
set IP address of outbound proxy server. After user set outbound proxy, all packets form
VIP-152T will be sent to outbound proxy server.
6. –prefix:
set prefix string. If user ID contains alphabets, user can set it as prefix string here. For
example, if Account Name is 123, VIP-152T will sent out messages as Account Name @”IP address
of Proxy”, if user set prefix as abc, VIP-152T will set out as abc123@”IP address of Proxy”. This
