User’s Manual of PL-702
13
Chapter2: Initial Utility Installing
2.1 Overview
The installation of 500M Ethernet Bridge will only take minutes. No need to set up
long wires through out the house, just simply install the utility, and physically plug the
unit into the wall outlet, then to connect RJ-45 to the computer. Users can select to
adjust its security functions and the platform of the network after the installation. For
further assistance, please read our Frequently Asked Questions section in our Web
site.
2.2 Running the Install Shield Wizard
Please verify that no other Powerline Management Utilities are installed before
installing this product. If other utilities were installed, uninstall them and restart
before installing this software.
To install, insert the utility CD into the computer's CD-ROM drive. The main page
shall pop up, then to press the link to install the software. Alternatively this can also
be done manually by double clicking the “
setup.exe
“ file on the CD.
Once the software is loaded, it will display a dialog as following, and please click
on ‘
Next
’ to continue the installation.
