Chapter 3: Configuration
Overview
The PL-201v2 uses 56-bit DES encryption to block outside access. The key is
set by using the Configuration Utility on the CD. By default, the protection is
enabled, however, it is recommended to change the default network password.
All your Powerline devices must use the same network password in order to be
connected together.
3.1 Main Screen
Part 1: Scan a Local Powerline device
Double click the
PowerPacket Utility
icon on your desktop and utility screen will
show up as below:
The Main tab shows the Powerline units that are connected to the current
computer and other Powerline devices on the home network, and it will also
display Mac Address of each device.
12