MH-5001 User Manual
Chapter 8
Routing
75
FIELD
DESCRIPTION
Range / Format
EXAMPLE
Activate this rule
The policy routing rule is enabled or not.
Enabled / Disabled
Enabled
Status
Rule name
The policy routing rule name.
text string
(Max: 200 entries)
GenlManaRoom
Incoming packets
from
Packets comes from which interface
LAN / DMZ
regions
LAN1
Source IP &
Netmask
Verify if the incoming packets belong to the
range of the Source IP/Netmask in the policy
routing rule.
IPv4 format / IPv4
format
192.168.40.192 /
255.255.255.192
Dest IP &
Netmask
Verify if the incoming packets belong to the
range of the Dest IP/Netmask in the policy
routing rule.
IPv4 format / IPv4
format
0.0.0.0 / 0.0.0.0
Service
Verify what is the service of this packet?
ANY / TCP / UDP
/ ICMP
Any
Configure src.
port? Type Src.
port
If the service is TCP or UDP, we can choose to
configure or not to configure source port.
Enabled / Disabled
No
Type
If we decide to configure source port, we must
choose the port to be single or range.
Single / Range
N/A
Src. Port
If we select single at above field, we just have to
fill a port in the first blank space. If we select
range at above field, we need to fill the range of
the ports.
1 ~ 65534
N/A
Configure dest.
port? Type Dest.
port
If the service is TCP or UDP, we can choose to
configure or not to configure destination port.
Enabled / Disabled
No
Type
If we decide to configure destination port, we
must choose the port to be single or range.
Single / Range
N/A
Condition
Dest. Port
If we select single at above field, we just have to
fill a port in the first blank space. If we select
range at above field, we need to fill the range of
the ports.
1 ~ 65534
N/A
Forward to
If the packet is matched to this rule, which
interface does this packet sent out to?
WAN interfaces
WAN1
Action
Nexthop gateway
IP
The next gateway IP address of forwarding
interface.
IPv4 format
210.2.1.6
Table 8-2 Add a policy routing entry