manualshive.com logo in svg

Planet Networking & Communication MH-2001, User Manual, Page: 10 / 12

Share
Download
Planet Networking & Communication MH-2001 User Manual Download Page 10

For Static IP Address:

 This option is for users who are assigned a static 

IP Address from their ISP. Your ISP will provide all the information needed 

for this section such as IP Address, Netmask, Gateway, and DNS. Use this 

option also if you have more than one public IP Address assigned to you.

   IP Address:

  Enter the static IP address assigned to you by your ISP. 

This will be the public IP address of the WAN 1 port of the device.

  Netmask:

  This  will  be  the  Netmask  of  the  WAN  1  network.  (Ex. 

255.255.255.0)

  Default Gateway:

 This will be the Gateway IP address.

  Domain Name Server (DNS):

 This is the IP Address of the DNS serv-

er.

    Max.  Upstream/Downstream  Bandwidth:

  The  bandwidth  provided 

by ISP. 

4.3 Configure WAN 2 interface:

If  you  want  to  connect  WAN  2  to  another  ISP  connection,  click 

Modify

 

button of 

WAN No. 2

 then repeat above procedures to setup.

4.4 Configure DMZ interface:

Depends  on  your  network  requirement,  you  can  disable  the  DMZ  port, 
make DMZ port transparent to WAN 1 or enable NAT function on it. 
To configure the DMZ port, select the Interface tab on the left menu, then 
click on DMZ, the following page is shown.

Please refer to section 3 for select the mode you need and configure rela-
tive IP parameters.

Summary of Contents for MH-2001













Reviews:

No comments