![background image](http://html.mh-extra.com/html/planet-networking-and-communication/ics-100/ics-100_user-manual_1563882015.webp)
User’s Manual of ICS-10x
-11-
Figure 2-7
ICS-102 / ICS-102S15 stand alone installation
Please refers to APPENDIX-A for detailed wiring information of the ICS-10X.
To prevent from optic acceptor malfunction, check the both wires / transmitter before power on the
converter.
2.2.2 Chassis Installation and Rack Mounting
To install the Media Converter in a
10-inch
or
19-inch
with standard rack, follow the instructions described below.
Step 1
: Place your ICS-10X on a hard flat surface, with the front panel positioned towards your front side.
Step 2
: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.
Figure 2-8
Insert a Media Converter into an available slot
Step 3
: Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.