POP server name:
It is necessary when the
POP before SMTP
is selected in
Authentication
.
Type the POP (receiving mail) server name up to 64 characters, or type the
IP address of the POP server. This setting is necessary when the SMTP
server which sends e-mails performs authentication using the POP user
account.
User name & Password:
Type the user name and Password of the user who has the mail account.
This setting is necessary when the SMTP server which sends e-mails
performs authentication.
Recipient
e-mail address
Type the recipient e-Mail address up to 64 characters. You can specify up
to three recipient E-mail addresses.
Administrator
e-mail address
Type the Administrator e-Mail address up to 64 characters. This address is
used for reply mail and sending system messages from the SMTP server.
Subject
Type the subject/title of the e-Mail up to 64 characters. With respect to mail
which is sent according to the IP notification.
Message
Type the text of the E-mail up to 384 characters. Default value provide
network information including IP, Port, MAC, Model and Serial..
Note:
When you set Authentication to
On
, be sure to select either or both
SMTP
or/and
POP before
SMTP
.
ICA-510 User Guide
46