Step 6:
Once the computer is rebooted, your system will find the DTR-100DB hardware device
which are not installed yet. When the below Wizard window is shown, please click “
Cancel
” to
continue.
After you finish those steps, please run the
Installation CD
again and click “
Install Driver
”
to install the Device Drivers. (Please refer to the next section “
3.2 Install Driver
”)
3.4 Install Windows Media Player 9
Before installing NewSoft Presto! PVR application program, it is necessary to install Media
Player 9 or higher for your Operating System. If your system already has Media Player 9, you
can skip this part of installation and go to
3.2 Install NewSoft Presto! PVR software
for
NewSoft Presto! PVR software installation.
Step 1:
Click “
Windows Media Player 9
” button from setup program of the installation CD.
Step 2:
Select the language version which you want to install and click “
OK
” to continue.
20