![background image](http://html1.mh-extra.com/html/planet-networking-and-communication/802-11g-wireless-broadband-router-wrt-410/802-11g-wireless-broadband-router-wrt-410_user-manual_1564010023.webp)
- 18 -
Network Address:
Type the static IP address your network uses to access the Internet. Your ISP or
network administrator provides you with this information.
Network Mask:
Type the network (subnet) mask for your network. If you do not type a value here, the
network mask defaults to 255.255.255.255. Your ISP or network administrator provides you with this
information.
Gateway Address:
Type the gateway address of your network. Your ISP or network administrator
provides you with this information.
Interface:
Select the interface WAN or LAN that you will use to connect to the Internet.
Metric:
Select which metric you want to apply to this configuration.
Add:
Click to add a configuration to the static IP address table at the bottom of this page.
Update:
Select one of the entries in the static IP address table at the bottom of the page and, after
changing parameters, click
“
Update
”
to confirm the changes.
Delete:
Select one of the entries in the static IP address table at the bottom of the page and click
“
Delete
”
to remove the entry.
New:
Click
“
New
”
to clear the fields and add required information to create a new entry.
3.4.2 Dynamic
This screen allows you to set the NAT parameters.