Planet Mobility GB-106 P3 Cruiser Owner'S Manual Download

Page: 2 / 39

Note: This owner’s manual is for the Planet Mobility’s P3 Cruiser model number GB-106.

Your P3 Cruiser package should include the following items. If your package arrived without

any of the following items, please contact us right away!

Owner’s Manual

Battery Charger

Battery Pack

Seat w/adjustable Arm Rests

Seat Post Hardware, (nut, bolt, pin and washers)

2 Keys

Tiller Mounted Basket

P3 Cruiser scooter

DISCLAIMER

World Wide

is not and cannot be held responsible for any damage or injury incurred due to improper

or unsafe use of the

World Wide

P3 Cruiser scooter.

World Wide

specifically disclaims

responsibility for any bodily injury or property damage that may occur during any use that does

not comply with applicable federal, state, or local laws or ordinances.

P3 Cruiser

Owner’s Manual- Model GB-106

Page 1

Summary of Contents for GB-106 P3 Cruiser








































Search results

Summary of Contents for GB-106 P3 Cruiser

Reviews:

Related manuals for GB-106 P3 Cruiser

Brands by name

Popular brands

Planet Mobility GB-106 P3 Cruiser, Owner'S Manual

Search results

Summary of Contents for GB-106 P3 Cruiser

Reviews:

Related manuals for GB-106 P3 Cruiser

Brands by name

Popular brands