SL94 FIXED OUTPUT LPR
ZICK 2 RAMMER SYSTEM
LPR CAP
#013 NBR
70
LPR PISTON
SPRING
LPR PISTON
#14x2 NBR 70
OR #016 NBR 70
#010 NBR 70
Your Eclipse
SL
comes as standard with an Eclipse SL Shaft 3 barrel.
The barrel screws into the body of the
SL
using a right hand thread meaning
that if you hold the
SL
pointing away from you the barrel screws into the
body in a counter-clockwise direction.
The barrel comprises of two parts, a barrel back
A
and a barrel front
B
.
The two parts are joined together with a left hand thread meaning that
if you hold the barrel, with the back nearest you, the front unscrews in a
counter-clockwise direction. The bore size of the barrel back is engraved at
the end of the barrel back
C
.
On the barrel back there is a
016 NBR 70
o-ring
D
which prevents the barrel
from vibrating loose from the SL body when the marker is fired. There is also
a
015 NBR 70
o-ring on the barrel front
E
helps with alignment when the
two sections are screwed together.
Replace and lubricate these o-rings with Eclipse Grease as necessary.
SL SHAFT3 BARREL KIT
C
D
A
E
B
NOTE: ThE SL wiLL ONLy ACCEpT COCKER ThREADED
BARRELS. DO NOT uSE ANy OThER TypE Of BARREL
ThREAD.
NOTE: whEN iNSTALLiNg ThE fixED OuTpuT LpR CAp, DO NOT
uSE ThE SmALL LpR ADjuSTER SpRiNg iN ThE fRONT Of ThE
piSTON fROm ThE ADjuSTABLE LpR CAp. iNSTALLiNg ThE SmALL
LpR SpRiNg iNTO ThE fRONT Of ThE fixED LpR CAp wiLL CAuSE
ThE OuTpuT pRESSuRE TO DROp TOO LOw AND CAuSE LOw AND
iNCONSiSTENT vELOCiTiES.
NOTE: ThE BORE SizE Of yOuR ShAfT 3 mAy vARy ACCORDiNg TO ThE
mODEL Of SL yOu hAvE.
#009 NBR 70
ZICK 2 RAMMER
#009 NBR 70
#011 NBR 70
CUSHION
ZICK 2
CAP
#010 NBR 70
#011 NBR 70
BUMPER
FEATURE SUPPLEMENT
4
FEATURE SUPPLEMENT
5
