Planer ShipsLog 3, User Manual

Page: 41 / 47

41
Appendix
Storage relative humidity (non-condensing) 5 % to 95 %
Sensor type Type T thermocouple.
Measurement range -200 °C to +390 °C: data logger
Accuracy System: ±3.4 % at -196 °C
6.2 Disposal
·
Do not dispose of with general waste.
·
Ensure that the equipment has been cleaned as necessary to ensure that it is safe to
handle and service and is free from any biohazard or toxic materials.
·
The data logger contains a 3.6 V, ½ AA lithium primary battery. Remove the battery
before disposal and dispose of the battery in accordance with local regulations. Refer
to the
Safety Instructions for safety information.
6.3 Returning for service
Should the SL3 need to be sent back to Planer Limited for repair, or if the unit is to be
inspected, maintained or repaired on-site by Planer Limited, a Declaration of
Decontamination must be completed. This can be downloaded from
http://planer.com/support/service/decontamination-certificate.html .
6.4 Common email settings
The following information can be used for the Email settings in EasyLog USB 21
CFR.
7
26