INSTALLATION OF THE LIGHTS
1. Install the products in the desired position and lay the cables so that they can be comfortably connected
to the transformer or cables.
2. If products are provided with a drain hole for water, this hole must be pointing downwards.
3. Use non-corrosive fixing materials (supplied as standard) if you want to bolt the products down.
4. Connect the lights to the main cable by using the connector as shown on page 5.
5. Plug the plug of the transformer into the wall socket (230 Volt 50 Hz).
Proceed as follows if the lamps do not light after you have followed the above instructions:
1. Turn the power off.
2. Check whether all plugs have been connected properly.
3. Check the light source(s) and replace them if necessary.
4. Check the transformer and the fuse (if applicable, and have them circuit-tested if necessary).
5. Check whether cables have been damaged.
6. Turn the power back on.
8
8
CONDITIONS OF GUARANTEE
We guarantee the perfect condition and function of this appliance. The guarantee is valid for 5 years
beginning from the date of sale to the end user. We will rectify all faults arising from defective materials or
manufacturing. The guarantee covers repair or replacement of the defective parts, subject to our approval.
The guarantee does not apply to damage to parts which are subject to wear and tear nor damage or defects
caused by improper use or incorrect maintenance. The guarantee only applies if the purchase receipt is sent
to the dealer together with the appliance. This guarantee does not affect your statutory rights.
GB
8
