Planar UltraRes 4K, User Manual

Page: 79 / 103

Planar UltraRes Remote Monitoring Software
72 Planar UltraRes User Manual
Monitoring software may not configure to the same network address after the system
reboots.
4
When you click Reset ALL to Factory Default , you receive the Confirm Factory
Reset page. Click OK, Reset to Factory Defaults and Reboot if you are sure you
want to reset ALL settings to the factory default.
5
The top of each page shows the Planar logo, which is a link to
http://www.planar.com
. You can change this link to refer to any URL that you find
useful by typing it into the Product ID Link box.
6
To make this link live, click Change Product ID Link .
7
In normal operations, Remote Monitoring polls the displays at a rate of one per
second to look for user requests that have been made using the IR remote control
and the on-screen menus. In some situations, this polling can have a noticeable
performance impact. If you want to disable this polling, select the
Disable
polling for alert conditions checkbox. When you are finished, click Change
Advanced Settings .
Reboot
Click Reboot now to reboot your system. The reboot takes about 90 seconds.