Operation
Planar PD7170 Installation/Operation Manual
35
PREL
IMINA
RY
4.1
Selecting Video Memory
Press
M1, M2
or
M3
to recall settings from a memory preset. Then, press
ENTER
to
confirm your selection. Or, to cancel the operation, press
to select
Cancel
and press
ENTER
.
You can assign each of these three buttons to any
of four memory presets. For more information, refer
to
M1 Key / M2 Key / M3 Key
on page 59.
4.2
Selecting an Aspect
Ratio
Press the aspect ratio (
) button to select the appropriate aspect ratio for the
type of program material being viewed. For more information, refer to Table 4-2.
4.3
Selecting An Input
Source
When you turn on the PD7170, it switches to the last
selected input and looks for a valid signal.
Use these buttons on the remote control to select
an input source directly. You can assign each of
these five buttons to any input. The default
assignments are: 1 = HDMI 1, 2 = HDMI 2,
3 = Component 1, 4 = S-Video, 5 = Video.
For more information, refer to
1 Key / 2 Key / 3 Key / 4 Key / 5 Key
on page 59.
4.
Operation
M1
M2
M3
SHARP
USER MEMORY
1
4
2
3
5
▲
SOURCE
Summary of Contents for PD7170
