manualshive.com logo in svg

Planar LO552, User Manual, Page: 12 / 72

Share
Download
Planar LO552 User Manual Download Page 12

Planar LookThru Transparent OLED Display User Manual 

020-1380-00D 

Page | 12 

Tour of the Planar LookThru Transparent OLED Product Family 

 

recommended to be used for any installation. The Display Chassis is the part of the 
display to use as a primary handhold during transport and mounting.   

There are five secondary M6 mounting points on the underside of the electronic box. 
These should only be used together with the primary mounting points on the Display 
Chassis, but never by themselves. A counter weight is attached to the underside of the 
electronic box in the 

Planar LookThru

. The counter weight also serves to create an 

acceptable open space for ventilation on the underside of the display. Like the leveling 
feet, it should be removed for a fixed mount installation, but provisions must be made for 
the proper 5 mm inch spacing.   

Note that the corners of the Display Chassis and the right side (viewed from the front) of 
the electronic box are chamfered at a 45

º

 angle, allowing a corner or right-angle 

installation of Planar LookThru displays. This is a feature found in all the Planar LookThru 
family of displays. The bottom view of a Planar LookThru in the figure below illustrates 
the corner chamfers. The leveling feet and counterweight are also shown.   

The backside of the electronic box also contains the controlling I/O for the display. This is 
shown in the figure below. The power switch and power cord receptacle are centered on 
the backside.  

The keypad is described in detail in the “OSD Keypad” section on page 23. There are 
four HDMI connectors consisting of two HDMI 2.0 compliant and two HDMI 1.4 compliant 
inputs. Additionally, there is a DisplayPort 1.2 input and a corresponding DisplayPort 
output. The RS-232 and LAN connectors are found on the right side of the electronic box 
along with the jack for the remote sensor as well as USB-A and USB-B ports.  

Summary of Contents for LO552









































































Reviews:

No comments