1. Swipe GAPit along vertical gap
2. Inspect for .050” gap & adjust if
needed
3. Swipe GAPit along horizontal gap
4. Inspect for .050” gap & adjust if
needed
Damage happens when weight is transferred to the ultra-thin bezels of video wall installations,
if the recommended gap specifications of .050” is not maintained vertically and horizontally.
This results in image distortion, and costly repairs and replacement
Use the
GAPit GO/No Go Gauge (supplied with model specific spacer)
as a final step in the process
to inspect and adjust the gap to
prevent costly replacement
and
extend the lifespan of the displays.
20
www.planar.com | North America Toll Free: 1-886-475-2627 | Direct: 1-503-748-1100
Installation Guide
998-0368-00 - VMT-MXL
Page 12
