20
4.4.4
Channel Data Logger
4.4.4.1
General Information
The Channel Data Logger is intended for measuring TV channel parameters on one of the channel
plans, checking cable network parameters for compliance with the selected limit plan and
documenting the check results in the analyzer’s memory. The Channel Data Logger allows viewing
the measurement results and errors in different parameters and uploading the data into your PC
for further processing and report preparation.
4.4.4.2
List of Channel Data Logger Pages
In the main selection menu, the icon
corresponds to the Channel Test mode. This mode
allows performing all possible operations with the Channel Data Logger: viewing,
deleting and
creating a new page. The screen views are shown in figures 4.12 and 4.13.
Figure 4.12
Figure 4.13
The screen displays a list of channel data logger pages with pages names, and also the channel and
limit plans related to the name. For each page in the first position of the row there is a status
indicator.
Indicator
Page status of the Channel Data Logger
Page is created, but not scanned.
Page is scanned, no errors are found.
Page is scanned, errors are found.
The bottom row contains a list of commands that are selected using the function buttons. The
buttons
«
◄
»
and
«
►
»
switch the screen view. Use the
« »
and
« »
buttons to select the
Channel Data Logger page.
