34
3. Management with Web browser software
3.3 Projector Management using SNMP
The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function.
• It is recommended that SNMP functions be carried out by a network
administrator.
• SNMP management software must be installed on the computer to monitor
the projector via SNMP.
NOTE
SNMP Settings (
16
)
Configure the following items via a web browser to use SNMP.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter
“http://192.168.1.10/”
into the address bar of the web browser.
2) Enter the Administrator ID and Password and click
[Logon]
.
3) Click
[Port Settings]
on the main menu.
4) Click
[Enable]
check box to open the
SNMP Port
. Set the IP address to send
the SNMP trap to when a Failure/Warning occurs.
5) Click
[Security Settings]
on the main menu.
6) Click
[SNMP]
and set the community name on the screen that is displayed.
7) Configure the settings for Trap transmission of Failures/Warnings. Click
[Alert Settings]
on the main menu and select the Failure/Warning item to be
configured.
8) Click
[Enable]
check box to send out the SNMP trap for Failures/Warnings.
Clear
[Enable]
check box when SNMP trap transmission is not required.
9) Click
[Apply]
button to save the settings.
• A Network Restart is required after the
Community name
has been
changed. Click
[Network Restart]
and configure the following items.
NOTE
• A Network Restart is required after the
SNMP Port
configuration
settings have been changed. Click
[Network Restart]
and configure the
following items.
NOTE
