Analogue transmitter SU20:
•
analogue signal 4...20 mA and 0...10 V
•
operating temperature up to 70 °C
•
accuracy: +/- 10 % of full scale
•
aluminium housing, anodized
Technical Data:
Accuracy*:
+/- 10 % of full scale
Operating temperature:
-20…+70 °C
Storage temperature:
-20...+80 °C
Repeatability:
+/- 3 % of full scale
Material housing:
aluminium, blue anodized
Protection class:
IP67
* Higher calibration accuracy when calibrated individually. Available on
request.
Electrical Data:
Analogue output:
4...20 mA and 0...10 V
Power supply:
24 VCD (19...30 VDC)
Power consumption:
< 1 W
Current output:
Max. load 600 Ω
Voltage output:
Max. current 10 mA
Connection:
For round plug M12x1, 5 pin
Note:
Please note that the flowmeter and the analogue transmitter
have been optimally adjusted to each other and may not be
exchanged!
Electrical connection:
Dimensions:
Accessories (see separate data sheets):
•
Needle valves SNV01, SNV02
•
Ball valves SKG01, SKG02
•
Dirt traps SF00, SF01
•
Protection relay MSR01
•
M12 Plug connector PVC-cable SM12
Notes:
The specified measuring/switching ranges apply when the
instrument is installed vertically and the flow rate is from bottom
to top.
Other installation positions or operating densities deviating from
the specified specifications increase the specified measuring
error.
Special scales for different media and operating conditions are
available on request.
The specified switching points are shut-off points at falling flow
rates. Please note that the switch-on points are higher due to
the hysteresis.
For applications where pressure surges are to be expected,
please contact PKP!
PKP Prozessmesstechnik GmbH
Borsigstr. 24 • D-65205 Wiesbaden
S
+49 (0) 6122-7055-0 •
T
+49 (0) 6122 7055-50
[email protected] • www.pkp.de
PKP Process Instruments Inc.
10 Brent Drive • Hudson, MA 01749
S
+1-978-212-0006 •
T
+1-978-568-006
[email protected] • www.pkp-usa.com