~
69
~
You can choose a delay period from 1 hour (min.) to 24 hours (max.).
3.
Press the button « S
TART
/ P
AUSE
» when having set the delay period.
4.
The countdown of the delay period starts and the operational status indicator of
the function « D
ELAY START
» goes on / flashes
12
.
5.
As soon as the countdown time has elapsed, the set drying programme starts.
6.
If you wish to cancel the delayed programme start
after
pressing the button
« S
TART
/ P
AUSE
» (but
before
the drying programme has started), you have to
switch off the appliance using the rotary knob (
OFF
).
13
During the countdown
: press the button « D
ELAY START
» once to indicate the
duration of the previously set drying programme on the display.
The function « D
ELAY START
» may not be available for all programmes
(depending on model).
4.5 End of a drying programme
1.
All drying programmes end with a 10-minute cooling down period.
2.
After the 10 minutes have elapsed, the indicator « P
ROGRAMME FINISHED
» goes
on. You can open the door and take your laundry out of the appliance.
3.
If you do not take your laundry out of the appliance after the drying programme
has ended, the appliance starts a factory-set anti-crease period (
max. 30
minutes
).
4.
The indicator « P
ROGRAMME FINISHED
» is still on.
5.
When the 30 minutes have elapsed, the dryer stops automatically.
6.
The display indicates « E
ND
» and the acoustic signal sounds for 15 seconds if the
signal has been switched on; s. chapter 4.4.2 T
HE ADDITIONAL DRYING
FUNCTIONS
/ F
UNCTION
: « S
IGNAL
».
7.
When the drying programme is finished, turn the rotary knob for the programme
selection back to «
O
FF
» to switch off the appliance completely.
8.
Unplug the appliance.
F
ACTORY
-
SET ANTI
-
CREASE FUNCTION
❖
The anti-crease function protects textiles from creasing.
❖
The drum rotates intermittently during the drying programme to protect textiles
from creasing.
❖
The anti-crease function is a factory-set function which is
always
activated at the
end of a drying programme automatically. The
preprogrammed duration
of the
anti-crease function is approx.
30 minutes
.
12
Depending on model.
13
Depending on model.
