56
light or intensive
Set a programme (1) + close the door (2) = the appliance is ready
for operation (3).
4. Before initial operation
Before you start operating the appliance, check that
1.
the appliance is positioned and levelled properly.
2.
the inlet valve is opened.
3.
the connections of the hoses do not leak.
4.
the appliance is plugged in properly.
5.
the power is switched on.
6.
the hoses are not knotted.
7.
you have removed the complete packaging material.
Before you operate the appliance for the first time:
A)
Adjust the water softener.
B)
Pour 500 ml water into the container of the water softener and pour in the
water softener (= dishwasher salt).
C)
Pour in the rinse aid.
D)
Select a washing programme.
A. Water softener
You must fill in the water-softener manually; please use the water-softener filler
hole. Open the lid and pour approx. 2 kg of water-softener into the container; then
close the lid properly.
B. Filling of the water softener container
The water softener container is beneath the lower dish rack.
Only use a water softener (= dishwasher salt) which is suitable for
dishwashers. Other water softeners and salts, especially table salt, will damage
the water softener container.
The manufacturer shall not guarantee against and is not liable for any damage
caused by an unsuitable water softener.
Fill the container only shortly before you start a programme, otherwise spilled
residuals of the water softener may remain in the appliance and cause corrosion.
The control light on the control panel goes off after the first programme.
