40
II.
Attach the inner chimney by tightening it using two 3*10 mm screws (s. fig.
B
).
13.
Insert the grease filters and connect the appliance to the mains
3
.
➢
Check from all sides that the appliance is aligned horizontally; otherwise the
appliance will not work properly.
2.4 Installation: Air recirculation
➢
If you do not use an exhaust air pipe to the outside for the installation of the
extractor hood, the exhaust hose is not required.
➢
The installation of the extractor hood
is similar
to
chapter 2.3.1
I
NSTALLATION STEPS
(please ignore point 5. and point 6.).
3
If the socket is covered by the chimney, you must plug in the appliance at an
earlier point in
time.
