53
4.
Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
5.
If installation near a heat source is unavoidable, use a suitable insulation plate or
keep the following
minimum distances
to the heat source:
To electric cookers
at least 30 mm
To radiators or ovens
at least 300 mm
To another refrigerators
at least 20 mm
6.
Check that the appliance and the power cord are not damaged.
7.
Install the appliance in a dry and well-ventilated place.
8.
Protect the appliance from direct sunlight.
9.
The door(s) must open completely and without hindrance.
10.
Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
11.
Connect the appliance to the mains properly.
12.
The rating plate is inside the appliance or at the back.
3.2 Space and ventilation requirements
Observe the required minimum distances for proper ventilation (s. chapter 3.2.2
W
ALL SPACERS
and chapter 3.2.3 V
ENTILATION
).
3.2.1 Space requirement
S
PACE REQUIREMENT OF THE APPLIANCE
:
