36
NOTICE!
Never
use mechanic devices, knives or other sharp-edged items to remove
encrusted ice inside the appliance.
Manual defrosting
(KS 120.4A++EB only)
1.
Remove the contents from the freezing-compartment and put them into a
cooling box.
2.
Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
3.
When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4.
Do not support the defrosting procedure with hot water.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
Replacing of the illuminant
1.
Switch
off
and
unplug
the
appliance.
2.
Remove the screw of the cover of the
illuminant
10
. Squeeze the sides of the
cover and remove it.
3.
Install a new illuminant of the same
kind and power (Max. 10W,
220~240V).
4.
Install the cover.
5.
.Wait 5 minutes before you connect the appliance to the mains again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.
Replacing of the power cord
WARNING!
The power cord must be replaced by a qualified
and authorized professional only.
10
Depending on model.
Summary of Contents for KS 120.4A++EB
Page 45: ...45 14 ANHANG ADDENDUM ...
Page 46: ...46 ...