43
Under-worktop installation
You can install the appliance under a worktop. Proceed as follows:
1.
Remove the worktop of the appliance. Remove the 2 screws on the backside,
lift the panel slightly and pull it forward.
2.
You must install a sheet-metal cover
4
as a vapour barrier. You can purchase such
covers in your local DIY warehouse.
Levelling
You can level the appliance with the adjustable feet.
Electrical connection
WARNING!
Disconnect power before you install the appliance
and before you plug in the mains plug.
Disregarding the instruction may cause lethal injuries or an electric shock.
1.
An electrical supply of 220-240V AC / 50 Hz is required.
2.
Connect the appliance to a suitable and dedicated socket only.
3.
For your personal safety, the appliance must be grounded. The appliance is
equipped with a 3-pole grounding plug. Use a suitable socket to minimize the
risk of an electric shock.
4.
The appliance must not stand on the power cord.
5.
If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid any kind of hazard.
6.
Check if the technical data of your energy supply meet the values on the
nameplate.
7.
Do not modify the appliance.
8.
Do not attempt to repair the appliance alone. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the shop you
purchased the appliance at and use original spare parts only.
9.
Your domestic circuit must be equipped with an automatic circuit breaker.
WARNING!
Do not use a socket board or a multi socket or an extension cord
when using
220–240 V/50 Hz alternate current (AC).All electrical connections which may be
damaged must be repaired by a qualified professional.
4
Not included in delivery.
