background image

70

SECURITY menu

Item

Description

TRANSITION 

DETECTOR

If this function is set to ON when the vertical angle of 

the projector or MIRROR setting at which the projector 

is turned on is different than the previously recorded, the 

TRANSITION DETECTOR ON alarm will be displayed 

and the projector will not display the input signal.

• To display the signal again, set this function OFF.

• After about 5 minutes of displaying the TRANSITION DETECTOR ON 

alarm, the lamp will turn off.

• Keystone adjustment feature has been prohibited as long as the Transition 

Detector function is on.

1 Turning on the TRANSITION DETECTOR

1-1  Use the ▲/▼ buttons on the SECURITY menu 

to select TRANSITION DETECTOR and press 

the ► or the 

ENTER

 button to display the 

TRANSITION DETECTOR on/off menu.

1-2  Use the ▲/▼ buttons on the TRANSITION 

DETECTOR on/off menu to select ON. Select 

ON and the current angle and MIRROR 

setting will be recorded. The ENTER NEW 

PASSWORD box (small) will be displayed.

1-3  Use the ▲/▼/◄/► buttons to enter a 

password. Move the cursor to the right side 

of the ENTER NEW PASSWORD box (small) 

and press the ► button to display the NEW 

PASSWORD AGAIN box, enter the same 

password again.

1-4  Move the cursor to the right side of the  

NEW PASSWORD AGAIN box and press  

the ► button to display the NOTE NEW  

PASSWORD box for about 30 seconds,  

please make note of the password during this time.

Pressing the 

ENTER

 button on the remote control or the ► button on the 

projector will return to the TRANSITION DETECTOR on/off menu.

• Please do not forget your TRANSITION DETECTOR password.

• This function will activate only when the projector is started after turning off 

the AC power.

• This feature may not function properly if the projector is not in a stable 

position when ON is selected.

2 Turning off the TRANSITION DETECTOR

2-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.

2-2  Select OFF to display the ENTER 

PASSWORD box (large). Enter the registered 

password and the screen will return to the 

TRANSITION DETECTOR on/off menu.

If an incorrect password is input, the menu will 

close. If necessary, repeat the process from 2-1.

3 If you have forgotten your password

3-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.

3-2  Select OFF to display the ENTER PASSWORD box (large). The 10 digit 

Inquiring Code will be displayed inside the box.

3-3  Contact your dealer with the 10 digit Inquiring Code. Your password will 

be sent after your user registration information is confirmed.

(continued on next page)

ENTER NEW PASSWORD 

box (small)

ENTER PASSWORD box 

(large)

Summary of Contents for CP-WX3011N





































































































Reviews: