Pixsys STR561, User Manual

Page: 44 / 112

44 -
STR561 - User manual
13.4 Dynisco MELT
This parameter allows to quickly set the device for operation with a selection of
Dynisco melt pressure sensors.
52 Easy-up
Select one of the listed Dynisco melt pressure sensors to automatically
configure the parameters suitable for that sensor
---------------- ( Default )
ECHO-MV3-PSI-R20 ECHO-MV3-PSI-R23
ECHO-MV3-PSI-R21 PT462E-15M-6/18
ECHO-MV3-PSI-R22
In particular, these selections should be set to the following parameters:
Sensor type Contact type alarm 1
mV / V sensor Alarm threshold 1
Decimal point Hysteresis alarm 1
Measure unit Lower limit alarm 1
Full scale Upper limit alarm 1
Lower limit Alarm type 2 (calibration)
Upper limit Graphic lower limit
Alarm type 1 (absolute) Graphic upper limit
13.5 Alarm 1
Parameters to configure Alarm 1
54 Alarm type
Alarm 1 selection
Disabled (
Default
) Remote control
Absolute alarm Gross weigth
Band alarm Net weight
Digital input 1 Stable weight
Digital input 2 Sum
Sensor failure