Pixsys DRR460 Series, User Manual, Page: 21 / 72

User manual - DRR460 - 21
3
Lo.L.i.
Lower Linear Input (Word modbus 2003)
Range AN1 lower limit only for linear input. Ex: with input 4..20 mA this
parameter takes value associated to 4 mA.
-32767..+32767 , Default : 0.
4
up.L.i.
Upper Linear Input (Word modbus 2004)
Range AN1 upper limit only for linear input. Ex: with input 4..20 mA this
parameter takes value associated to 20 mA.
-32767..+32767 . Default :10000
5
Pot.v.
Potentiometer Value (Word modbus 2005)
Select potentiometer value
1..150 kohm . Default : 10kohm
6
L.i.o.L.
Linear Input over Limits (Word modbus 2006)
If linear input, allows process to go over limits (Par. 3 and 4).
0 Disabled ( Default )
1 Enabled
7
o.cAL.
Offset Calibration (Word modbus 2007)
Value added / subtracted to the process visualization (usually correcting the value of
environmental temperature).
-10000..+10000 [digit 1 ] (degrees.tenths for temperature sensors). Default 0.
8
G.caL.
Gain Calibration (Word modbus 2008)
Percentage value that is multiplied for the process value (allows to calibrated the working point).
Ex: to correct the range from 0..1000°C showing 0..1010°C, set the par. to -1.0.
-1000 (100.0%)...+1000 (+100.0%), Default : 0.0.
9
Ltch
Latch-On (Word modbus 2009)
Automatic setting of limits for linear inputs and potentiometers.
0 Disabled ( Default )
1 Standard
2 Virtual zero
3 Linear virtual zero
10
FLtr.
Filter (Word modbus 2010)
Analogue input reading filter: increases process stability on word 1000, 1100, 1200, 1232.
1...50. ( Default : 1)
11÷15 Reserved Parameters - Group A
Reserved parameters - Group A