Pixsys CNV580-1AD, User Manual

Page: 10 / 88

10 - CNV580 - User manual
Digital Controller and devices that generate powerful high frequencies
(high-frequency welders, high-frequency sewing machines, etc.) or surge.
• A switch or circuit breaker must be provided close to device. The
switch or circuit breaker must be within easy reach of the operator,
and must be marked as a disconnecting means for the controller.
• The device must be protected by a fuse 2A (cl. 9.6.2).
• Wipe off any dirt from the Digital Controller with a soft dry cloth. Never
use thinners, benzine, alcohol, or any cleaners that contain these or
other organic solvents. Deformation or discoloration may occur.
• The number of non-volatile memory write operations is limited.
Therefore, use EEprom write mode when frequently overwriting data,
e.g.: through communications.
1.4 Environmental policy / WEEE
Do not dispose electric tools together with household waste material.
According to European Directive 2012/19/EU on waste electrical and
electronic equipment and its implementation in accordance with national
law, electric tools that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility.