ATR243 - User manual -
19
7.8 Memory Card (optional)
Parameters and setpoint values can be duplicated from one controller to another using
the Memory card.
2 modes are available:
• With the controller connected to the power supply.
Insert memory card
when the controller is off
.
On activation display 1 shows
memo
and display 2 shows
---
(
only if the correct
values are saved in the memory card
). By pressing
key display 2 shows
Load
, then
confirm using
SET
key.
Controller loads the new value and restarts.
U1
CN1
C1
MEMOR
Y C241
LED ROSSO: acceso in programmazione
Red Light: waiting for programming
LED VERDE: programmazione eseguita
Green Light: done
•
With the controller not connected to power supply.
The memory card is equipped with an internal battery with an autonomy of about
1000 uses (2032 button battery, replaceable). Insert the memory card and press the
programming buttons. When writing the parameters, led turns red and on completing
the procedure it changes to green. It is possible to repeat the procedure without any
particular attention.
NB
: it is not possible to transfer parameters to a device with different code: red LED is ON.