S-Video
TV
Input Connector
D-SUB 15 PIN
Plug & Play Support
VESA DDC1/2B
Power Management
DPMS
Vertical Frequency
56
~
75Hz
Input Voltage
AC100V
~
230V, 50/60Hz
Power Consumption
DC 34W(Max.)—Operation
DC 4W(Max.)—Energy Saving Mode
Accessories
Power Cord, Signal Cable, Audio Cable,
Remoter, User’s Manual
Operating Temperature:
0
~
50
℃
Humidity:
≤
85%
User Controls
OSD: Menu, V+, V-, C+, C-, Select, Auto,
Mute, Input Select,
Outline Dimension
383.5 (H) x 306.5 (V) x 22.8 (D)mm
Weight
Net: Gross:
17. Troubleshooting
This section describes common problems that you may encounter
through the daily use of your Pixstorm LCD TV.
If this section does not resolve your problem, please contact
Pixstorm Customer Service (refer to Section 3) for further
assistance.
Q: My screen is on, but there is no sound?
A:
Make sure the unit is not on Mute, check the volume, and in
Video or PC mode check whether the Audio in cable is connected
properly to both the LCD TV and the external device. In TV mode,
make sure the Antenna is working properly.
Q: The LED is on, but my screen is still black?
A:
Check the video cables to make sure they are properly connected
to both your LCD TV and the external device. Check if both units
are turned on.
Q: My screen is too dark, how do I adjust the brightness?
A:
Select the Picture Icon in the Menu, and then configure the
brightness and contrast settings to your desired specifications.
Q: Why are there dead pixels on my screen?
A:
All LCD screens will eventually have dead pixels. Although we
strive to select top-quality panels, we cannot assure you that your
LCD screen will not have dead pixels because it is the nature of the
technology.
Q: How can I adjust the display size and position?
A:
You can configure these settings by selecting the Picture
Position Setup Icon in the Menu and by setting the Hpos and Vpos
settings.
Q: Why is the text blurred?
A:
Adjust the Clock Phase and Contrast Ratios settings to make the
screen crisper and sharper.
Q: Why is my TV reception bad?
A:
To ensure good reception you should make sure that you are
using a coaxial cable and high power antenna.
Q: The picture is scrambled, what should I do?
A:
Check the signal connection between the LCD TV and the
external device.
Q: The picture is wavy?
A:
Check the signal connection between the LCD TV and the
external device.
Q: The colors are distorted and some areas are dark and
shadowed?
A:
Adjust the color settings by selecting the Picture Icon in the
Menu.
