Introduction
Getting connection with the device
Step1.
Power on the router. Connect your PC to LAN port with RJ-45 cable.
Step2.
Please open your browser (ex. IE) and type in default IP (http://10.10.10.1) on URL column.
Front Panel
Rear Panel
Accessories:
Step3.
Type in the default username/ password (
admin/ admin
), then enter the page.
The default operation mode will be “Gateway mode”
(for Vehicles)
(for Vehicles)
Step4.
Please set up 3G on WAN page. (Left menu > Internet Settings > WAN)
Quick Installation Guide
PiXORD
3GR-431P
Vehicle 3G Wi-Fi Router
3G Antenna GPS Antenna Wi-Fi Antenna Power Cord I/O Cord
Step4.
Please set up 3G on WAN page. (Left menu > Internet Settings > WAN)
Type in APN and Dial Number provided by service providers.
Hardware Installation
Step1.
Please remove screws from front
Step2.
Open the upper case.
and rear panels as below.
Step5.
On the WAN page, enter username/ password if required. (Optional)
Step6.
Type in PIN code settings if required. (Optional)
(Left Menu > Mobile 3G Management > Mobile 3G Protection)
Step3.
Insert the SIM card.
Step4.
Install the Power Adapter, DC Jack to
NOTE:
Please pull and push the socket cautiously.
Mini Fit, and antennas.
For more information, please refer to the CD Manual.
DC Jack to Mini Fit Power Adapter Screws
CD QIG
For more information, please refer to the CD Manual.
1
2
