PixelRange PixelPar, User Manual

Page: 4 / 6

4
Chase effects
This section describes each of the internal chase effects that are selectable either via the control menu (
PROG
>
C1
/
C2
>
EFEC
) or using DMX values sent from an external source. To use the internal effects, set the
MODE
option either to
EF M
(for internal menu control), or
EF D
or
4+E
(for external DMX control).
DMX DMX EFEC Chase effect description On/off ratio Cell sequence
value % value per cell
0-7 0-2
00
Off - -
8-15 3-5
01
Rainbow chase forward All on A
à
B
à
C
à
D
à
E
à
F
16-23 6-9
02
Rainbow chase reverse All on F
à
E
à
D
à
C
à
B
à
A
24-31 10-11
03
White chase forward 1/5 A
à
B
à
C
à
D
à
E
à
F
32-39 12-15
04
White chase reverse 1/5 F
à
E
à
D
à
C
à
B
à
A
40-47 16-18
05
White group chase 1/2 AF
à
BE
à
CD
48-55 19-21
06
White strobe 1/1 All together
56-63 22-24
07
Red strobe 1/1 All together
64-71 25-27
08
Light purple strobe 1/1 All together
72-79 28-30
09
Yellow strobe 1/1 All together
80-87 31-34
10
Green strobe 1/1 All together
88-95 35-37
11
White strobe 1/10 All together
96-103 38-40
12
Light blue strobe 1/10 All together
104-111 41-43
13
Rainbow strobe 1/2 All together
112-119 44-46
14
Red/green/blue strobe 1/2 All together
120-127 47-50
15
Rainbow strobe All on All together
128-135 51-53
16
Red/green/blue strobe All on All together
136-143 54-56
17
Yellow/blue strobe All on All together
144-151 57-59
18
Rainbow strobe All on All together
152-159 60-62
19
Yellow/blue chase All on ACE
à
BDF
160-167 63-65
20
Red/blue chase All on ACE
à
BDF
168-175 66-68
21
Red/yellow chase All on AB
à
CD
à
EF
176-183 69-72
22
Red/green/blue chase reverse All on CF
à
BE
à
AD
184-191 73-75
23
Rainbow chase forward All on AB
à
CD
à
EF
192-199 76-77
24
Red/green/blue chase reverse All on EF
à
CD
à
AB
200-207 78-81
25
Static orange All on All together
208-215 82-84
26
Static yellow All on All together
216-223 85-87
27
Static light blue All on All together
224-231 88-90
28
Static purple All on All together
232-239 91-93
29
Static red All on All together
240-247 94-97
30
Static green All on All together
248-255 98-100
31
Static white All on All together
The ‘On/Off ratio per cell’ column indicates the proportion of time that a fixture will be showing output or be dark for a
given effect. For example, 1/5 indicates that the fixture will be on for one part and off for 5 parts of the time.
Some effects are spread between six cells so that as well as colour changes, there are position changes (viewable if you
are using the PixelPar as a master to control chases on other PixelRange fixtures - see ‘Using master mode to drive other
units’). The ‘Cell sequence’ column above indicates whether effect changes move between fixtures that are set at different
cell addresses. The cell address boundaries are as follows:
Cell DMX addresses
A 1 to 4
B 5 to 8
C 9 to 12
D 13 to 16
E 17 to 20
F 21 to 24
Note: When you use a single PixelPar and you choose
a chase effect that spreads across different cells, you will
see only the cell A parts of the effect, as listed in the table
above.