3
Sets the base DMX address from which the control channels will begin.
Shows the main processor software revision. No changes are possible within
this option.
Shows the display controller software revision. No changes are possible within
this option.
Selects the primary internal chase effect. See
Chase effects
for descriptions.
Select
MODE
>
EF M
to show the selected chase.
Selects the cross fade speed between the steps of the selected
C1
chase effect.
Selects the speed of the selected
C1
chase effect.
Selects the master intensity level of chase effects
C1
and
C2
.
Selects the secondary internal chase effect. See
Chase effects
for descriptions.
Select
MODE
>
EF M
to show the selected chase.
Selects the cross fade speed between the steps of the selected
C2
chase effect.
Selects the speed of the selected
C2
chase effect.
Sets the red intensity. Select
MODE
>
MANU
(manual) to show the result.
Sets the green intensity. Select
MODE
>
MANU
(manual) to show the result.
Sets the blue intensity. Select
MODE
>
MANU
(manual) to show the result.
Legacy option, which should be set to
3CH
for best results when using
DMX
mode.
Thus, if
MINT
is set on, the master intensity channel will occur at channel 4.
Determines whether this fixture will act as a master controlling others.
When controlled via DMX this fixture must be set to
SLAV
.
DMX
and
EX61
modes only. When set
ON
this enables the master intensity channel
(ch55 for
EX61
, variable for
DMX
). This option must be set
ON
for
EX61
mode.
Legacy option that is no longer available.
Determines the intensity of the four digit control panel display and blue status
indicators. Values range from 0 (dimmest) to 15 (brightest).
When set to
AOFF
, the control panel display will blank out 60 seconds
after the menu is exited. The blue status indicators will remain active.
RGB control using variable DMX channels determined by
PERS
>
RES
setting.
MINT
set to
ON
provides a master intensity. No chase effects are selectable.
Displays the resulting RGB levels that are set via the
MAN
section of the internal
menu. External DMX control is not possible in this mode.
Ch1 to 3:
C1
Effect, Speed & Xfade, Ch4 to 6:
C2
Effect, Speed & Xfade,
Ch7: Master intensity, Ch8-10: RGB.
Displays the chase effect(s) determined within the
PROG
section. External DMX
control is not possible in this mode.
Legacy mode which makes inefficient use of DMX channels. Use
MAX2
in
preference.
Legacy mode which makes inefficient use of DMX channels. Use
MAX2
in
preference.
DMX Ch1 to 3: RGB, Ch4 to 6:
C1
Effect, Speed & Xfade,
Ch7 to 9:
C2
Effect, Speed & Xfade, Ch10: Master intensity.
Control menu contents