Pixapro ST-IV+ L, Instruction Manual, Page: 10 / 16

Icons Functions Setting Icons Settings and Description
Icons Functions Setting Icons Settings and Description
Only send triggering signals in
the M & Multi mode when
camera is shooting
Trigger testing
Shutter testing
In port, enable ST-IV+ L to
trigger flash
Out port, send trigger signals
to trigger other flash
turn off Beeper
turn on Beeper
Enter sleep mode after 60
seconds of idle use
Enter sleep mode after 30
minutes of idle use
Enter sleep mode after 60
minutes of idle use
The contrast ration can be
set as integral number from
-3 to +3
Off in 12 seconds
Always off
Always lighting
turn off sleep mode
Send parameters and triggering
signal when camera is shooting
(suitable for multi person
photography)
The flash parameters can be adjusted
directly on Sekonic L-858 Light Meter when
collocating with it, and the transmitter only
transmits SYNC signal
turn off TCM transform function
Li-ion580III series
Transform the
TTL shooting
value into the
output value in
the M mode.The
main light mode
shall prevail in
mixed use.
CITI100Pro
PIKA200
CITI300Pro
CITI400Pro
CITI600, 600PRO
CITI1200Pro
turn off legacy hot shoe
turn on legacy hot shoe, TTL flash
is unavailable, HSS function is
also unavailable
OFF
ON
One-shoot
Full-shoot
Connect to
L-858
L-858
TCM
transform
function
Legacy
hot shoe
SHOOT
TCM
100j
200j
300j
360j400j
600j
1200j
OFF
OFF
12sec
ON
PC socket
Beeper
Sleep
LCD
Backlighting
TRIGGER
SHUTTER
TEST
button
IN
OUT
OFF
ON
60 sec
30 min
60 min
-3-+3
LCD
contrast
ratio
OFF
LCD
PC
Z
Z
Z
39 40