11.
PIVOT CLIP REPLACEMENT GUIDE
1
Pivot Clip
2
Hinge Pin
3
Hinge Cap
4
Flex
Spring
Before beginning any clip replacement
procedure, please ensure you have a
compatible Pivot Clip Kit. The PIVOT
OMNI 97 case uses the PCK-2 Assembly,
Gen 2.0. It is not compatible with older
version of the PIVOT clip.
Getting Started
Required:
1 Unit PCK-2 Assembly, Gen 2.0
1pc Pivot Clip
1pc Hinge Pin
1pc Hinge Cap
1pc Flex Spring
Remove Hinge Cap
a) Remove device. Follow instructions on pivotcase.com for your case and device type.
b) Remove the hinge cap using blunt end of pliers’ nose and mild leverage to pry the
small cap off. There is a small ledge on the edge of the cap for this purpose.
