Piusi F00214000, Installation, Use And Maintenance Manual

Page: 9 / 124

9
/124
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
PIUSI P 3.5 - PIUSI P 5.5
Check that the data on the plate correspond to the
desired specifications. In the event of any anomaly,
contact the supplier immediately, indicating the
nature of the defects. Do not use equipment which
you suspect might not be safe.
WARNING
In the event that one or more of
the components described below
are missing from inside the package,
please contact PIUSI S.p.A.
technical support.
NOTE
POSITION OF IMPORTANT INFORMATION
An adhesive label showing the operator the most
important information is affixed to the dispensing
system. Check that this label does not deteriorate
over time or come off. The label shows the
following information relating to use:
Stamp on the bottom of the pump,
or on the pick-up hose, showing
information about the device.
8.
If all or part of the label
deteriorates or comes off,
please contact our customer
care department to ask for a
replacement.
NOTE
PIUSI SPA - MADE IN ITALY
PIUSI P 5.5 - ST F0021401A
SERIAL N. 0123456789
CE EAC
To open the cardboard packaging, use a pair of scissors or a cutter, being careful not to
damage the dispensing system or its components. Open the packaging and check that the
components provided as part of the equipment are available.
safety
shoes
close-fitting
clothing
protective
gloves
safety
goggles
Consult
“Installation, use
and maintenance”
manual